Configure a G-240W-C indoor ONT
122
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
3 Click Add.
4 STOP. This procedure is complete.
Procedure 36 Port triggering
1 Select Application > Port Triggering from the top-level menu in the GPON Gateway window,
as shown in Figure 56.
Figure 56 Port Triggering window
Table 46 describes the fields in the Port Triggering window.
Table 46 Port triggering parameters
Field Description
Application Name Choose an application name from the drop-down menu
Open Port Enter the open port range
Triggering Port Enter the triggering port range
Expire Time Enter the expiration time in seconds
(1 of 2)
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
