Configure a G-240W-C indoor ONT
146
7368 ISAM ONT G-240W-C Product Guide
3FE-46256-AAAA-TCZZA Issue: 01
Procedure 54 Retrieve Residential Gateway (RG) troubleshooting counters
1 Select RG Troubleshooting Counters from the left menu in the GPON Home Gateway
window.
The RG Troubleshooting Counters window appears; see Figure 75.
Figure 75 RG Troubleshooting Counters window
Table 56 describes the fields in the RG Troubleshooting Counters window.
Table 56 RG Troubleshooting Counters parameters
Field Description
WAN Connection List Choose a WAN connection from the list
US Throughput This test is used to determine the upstream throughput/speed
Click US Speed Test to specify the time for the upstream test
The default is weekly, performed at idle to a public server
DS Throughput This test is used to determine the downstream throughput/speed
Click DS Speed Test to specify the time for the downstream test
The default is weekly, performed at idle to a public server
US Packet Loss The number of upstream packages lost
DS Packet Loss The number of downstream packages lost
Internet Status Whether the broadband connections is active (UP) or not (DOWN)
Latency This test is used to determine the lowest round-trip time in milliseconds by
pinging the target server multiple times
Click Latency Test to specify the time for the test
The default is weekly, performed at idle to a public server
(1 of 2)
Release 06.01.00 | March 2019 | Edition 12
To Next Page
Loading...
