Nokia 7368 ISAM ONT G-240W-C

To Next Page

To Previous Page

G-240W-C unit data sheet

7368 ISAM ONT G-240W-C Product Guide

3FE-46256-AAAA-TCZZA Issue: 01

Some voice features are configurable on a per ONT basis, including Call Waiting, Call Hold, 3-Way Calling, and

Call Transfer.

The following voice features / GSIP parameters are configurable on a per-Client/ per-ONT basis (not

per-Subscriber):

• Enable Caller ID and Enable Caller Name ID

• Digitmap and the associated Interdigit and Critical timers and Enter key parameters

• Warmline timer is enabled per subscriber, but the warmline timer value is configured per ONT and must

have a lower value than the Permanent time

• Miscellaneous timers: Permanent, Timed-release, Reanswer, Error-tone, and CW-alert timers

• Features / functions: Message waiting mode, WMWI refresh interval, DTMF volume level

• Service Codes for the following features: CCW, Call Hold and Warmline

Considerations and limitations

(2 of 2)

Release 06.01.00 | March 2019 | Edition 12

Nokia 7368 ISAM ONT G-240W-C - Page 58