7. To start autotuning, choose Auto-Tune from the Tuning menu.
8. In the Auto-Tune window, click Options.
9. In the Auto-Tune options window, see that the "Enable showing of messages" check box is checked,
then click OK.
10. To complete the RF autotuning, click OK.
Results
"Autotuning completed successfully" message appears.
RM-88
RF Troubleshooting and Manual Tuning Guide Nokia Customer Care
Issue 1 COMPANY CONFIDENTIAL Page 7 –19
Copyright © 2006 Nokia. All rights reserved.
To Next Page
Loading...
