3 Performing the Initial Configuration
34 IP390 Security Platform Installation Guide
Note
If the username login screen does not open, you might not have a physical network
connection between the host and your appliance, or you might have a network routing
problem. Confirm the information you entered during the initial configuration and check
that all cables are firmly connected. For more information, see the troubleshooting
section in the installation guide for your appliance.
Viewing Nokia IPSO Documentation by Using Nokia Network
Voyager
Note
If you do not see the documentation as shown in Figure 8, you might need to enable the
document package. You do this be navigating to Configuration > System
Configuration > Packages > Manage Packages and turning the package on.
The following documentation is available in Nokia Network Voyager and is accessible from the
Network Voyager interface, as shown in Figure 8:
Nokia Network Voyager Reference Guide—This guide is the comprehensive reference
source for Nokia Network Voyager. To access this source, look at the list in the navigation
tree on the left side of the window (as shown in Figure 8).You can also access the Nokia
Network Voyager Reference Guide and other Nokia IPSO documentation at the Nokia
support site (https://support.nokia.com) or on the software CD that was delivered with your
appliance.
Nokia Network Voyager Inline Help—You can access inline help when you use Nokia
Network Voyager. Inline help is the context-sensitive information source for Network
Voyager. To access inline help for the window you are viewing, click Help. A Close button
is available at the bottom of each inline help window you view.
To Next Page
Loading...
Need help?
General
