8 Replacing Other Components
118 IP560 Security Platform Installation Guide
To remove or replace a hard-disk drive
Caution
If you fail to use the following procedure when you remove the hard-
disk drive, the drive might become damaged or you might lose data.
1. Use Nokia Network Voyager or the command-line interface (CLI) to
perform an orderly shutdown of the IP560 appliance.
For information about how to access Network Voyager and the related
reference materials, see “To open Nokia Network Voyager” on page 52.
2. Turn off the power to the IP560 appliance.
3. Loosen the two front panel retaining screws.
00354
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1
2
3
4
IP560
Chassis tray assembly retaining
screws
To Next Page
Loading...
