8 Replacing Other Components
132 IP560 Security Platform Installation Guide
To replace the accelerator card
1. Use Nokia Network Voyager or the command-line interface (CLI) to
perform an orderly shutdown of the IP560.
For information about how to access Network Voyager and the related
reference materials, see “To open Nokia Network Voyager” on page 52.
2. Turn off the power to the IP560 appliance.
3. Loosen the two chassis tray assembly retaining screws.
00354
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1
2
3
4
IP560
Chassis tray assembly retaining
screws
To Next Page
Loading...
