Replacing the Battery
IP560 Security Platform Installation Guide 147
9. Slide the chassis tray assembly back into the appliance until it clicks into
place.
10. Resecure the chassis tray assembly retaining screws.
11. Turn on the power supply at the back of the appliance.
The appliance should start up normally with the new battery installed. If it
does not, repeat step 1 through step 11. If the appliance does not start up
normally after that, contact your Nokia service provider. For more
information, see “Nokia Contact Information” on page 3.
12. Reset the appliance date and time information by using Nokia Network
Voyager or the command-line interface. The battery is required to
maintain the date and time whenever you shut down the appliance.
SLOT 1
SLOT 2
SLOT 3
SLOT 4
1
2
3
4
IP560
00359
To Next Page
Loading...
