NONLINEAR LABS C15 - Page 77

Parameter Reference
Parameter Reference
152 153
Determines the influence of the “Pedal 2” Hardware Source
on Macro Control A. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 2” Hardware Source
on Macro Control B. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Hardware Amounts
Hardware Amounts
Determines the influence of the “Pedal 2” Hardware Source
on Macro Control C. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 2” Hardware Source
on Macro Control D. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 3” Hardware Source
on Macro Control A. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 3” Hardware Source
on Macro Control B. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 3” Hardware Source
on Macro Control C. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 3” Hardware Source
on Macro Control D. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 4” Hardware Source
on Macro Control A. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 4” Hardware Source
on Macro Control B. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 4” Hardware Source
on Macro Control C. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).
Determines the influence of the “Pedal 4” Hardware Source
on Macro Control D. If the Pedal is a returning Hardware
Source, the amount can be adjusted continuously, otherwise
it will be switch-like. Continuous amounts can be set [in
percent] and can cover the whole range of the Macro Control
in both directions (-100.0 % … 100.0 %).