Nord Drivesystems B 1000 - Shaft Connection Options

3 Assembly instructions, storage, preparation, installation
B 1000 en-4419 27
Pos: 91 /A nl eitu nge n/G etr iebe /3. Mont ag e, L ager ung , V orb erei tung , Aufs tell ung /Mo ntag e/M ont ag e vo n Sc hru mpfs chei be n_0 1 - Ü bers chri ft [ B1 000 ] @ 3 9\mod_1572960280774_388.docx @ 2572216 @ 2 @ 1
3.8 Fitting shrink discs
Pos: 92 /Anleitungen/Getriebe/3. Montage, Lager ung, Vor ber eitu ng, Au fst ellu ng/M ont age/ Mo nt age von S chr ump fsch ei ben_ 02 - H ohlw elle mi t Schru mpfsc heibe (Optio n: S) [B1 000] @ 39 \mod_1572960290194_388.docx @ 2572255 @ 355 @ 1
3.8.1 Hollow shaft with shrink disc (Option S)
NOTICE!
Damage to the hollow shaft
• Do not tighten the clamping bolts if the solid shaft is not inserted.
Explanation
1
Shrink disc, type, part no. and torque
details for tensioning screws
2
Tensioning flanges
3
Solid shaft of machine
4
Shaft and hollow shaft bore FREE OF
GREASE
5
Hollow shaft of gear unit
6
Double half-slotted inner ring
7
Tensioning screws DIN 931 (933) -10.9
Figure 14: Hollow shaft with shrink disc
The shrink discs are supplied by the manufacturer ready for fitting. They must not be dismantled prior
to fitting.
The solid shaft of the machine runs free of grease in the hollow shaft of the gear unit.