Nord Drivesystems NORDAC FLEX SK 215E Series Brief Instructions

NORDAC FLEX (SK 200E ... SK 235E) – Brief instructions for Frequency Inverters
94 BU 0240 en-US-4920
Pos: 77 6 /Anlei tung en/El ektr onik/FU und Star ter/9 . Wart ungs- u nd Serv icehi nwei se/Ser vice hinwei se [SK 1xxE, SK 2x xE, S K 5xxE, SK xxxE-FD S, SK 5xx P] @ 32\mod_1553503074781_14638.docx @ 2519505 @ 2 @ 1
9.2 Service notes
Out technical support is available to reply to technical queries.
If you contact our technical support, please have the precise device model (nameplate/display),
accessories and/or options, the software version used (P707) and the series number (name plate) at
hand.
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstrasse 37
D-26605 Aurich
Please remove all non-original parts from the device.
No guarantee is given for any attached parts such as power cables, switches or external displays.
Please back up the parameter settings before sending in the device.
Information
Please note the reason for sending in the component/device and specify a contact for any queries that
we might have.
You can obtain a return note from our web site (Link
) or from our technical support.
Unless otherwise agreed, the device is reset to the factory settings after inspection or repair.
Information
In order to rule out the possibility that the cause of a device fault is due to an optional module, the
connected optional modules should also be returned in case of a fault.
Contacts (telephone)
Technical support
During normal business hours
+49 (0) 4532-289-2125
During normal business hours +49 (0) 180-500-6184
Repair inquiries
During normal business hours
+49 (0) 4532-289-2115
The manual and additional information can be found on the Internet under www.nord.com.
=== Ende der Lis te f ür T extm ar ke I nhal t == =

Nord Drivesystems NORDAC FLEX SK 215E Series Specifications

General

Brand	Nord Drivesystems
Model	NORDAC FLEX SK 215E Series
Category	Inverter
Language	English