PICO Toµch Controller
36 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Managing Password Protection
The controller requires one of three password types to access some
screens.
Password Type Function Default Password
SYSTEM Protects the SYSTEM and
SET PASSWORDS screens.
EFD_STM
LOCKOUT Protects the SET FUNCTION
LOCKOUT screens.
EFD_LOK
RESET Protects the factory-reset
function.
EFD_RST (non-editable)
Changing a SYSTEM or LOCKOUT Password
NOTE: To password-protect (lock out) additional menu items, refer to
"Managing Lockouts" on page 37.
1. Press the SETTINGS icon ( ).
2. Press the SYSTEM icon ( ) and enter the SYSTEM password.
3. Press MORE... > PASSWORDS > and enter the SYSTEM password.
4. Press SYSTEM or LOCKOUT and then enter the new password.
Passwords are limited to eight (8) characters.
5. Press OK (check) > HOME to save the setting and return to the
HOME screen.
Resetting the SYSTEM and LOCKOUT Passwords
If you forget a SYSTEM or LOCKOUT password, follow this procedure
to reset the passwords to their defaults.
NOTE: Changing the LOCKOUT password AND also enabling the
SYSTEM lockout removes the ability to perform this password reset.
Contact Nordson EFD Technical Services if you forget your custom
LOCKOUT password and you have enabled the SYSTEM lockout.
1. Press the SETTINGS icon ( ).
2. Press the SYSTEM icon ( ).
3. When prompted for the SYSTEM password, enter PICO_TOUCH.
The SYSTEM and RESET passwords are restored to their defaults
and the controller opens the SET PASSWORDS screen.
4. Enter new passwords or press HOME to accept the factory defaults.
Setup and Programming Procedures (continued)
ABOUT
CALENDAR
CLOCK SET
OK (check) LANGUAGE RAMP
Backspace Cancel HEATERS LOCKOUTS SETTINGS
LCD SETTINGS Decimal Point HOME PASSWORDS SYSTEM
CYCLE Decrement Increment PURGE VALVE
To Next Page
Loading...
Need help?
General
