Nordson EFD PICO Touch User Manual

PICO Toµch Controller
50 www.nordsonefd.com info@nordsonefd.com 800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.
Wiring Diagrams
PICO Toμch Controller Inputs
• All inputs are 0–12V OFF, 15–24V ON.
• When ON, the current draw is 18 mA per pin at 24V, showing about 1.3 kΩ input resistance.
Pin numbers correspond to the
numbers on the 15-position
I/O 1 port D-sub.
Analog Ground
Temperature In
PICO Toµch Controller Inputs
Process Control,
Robot, PLC, etc.
0–24V Voltage Initiate Signal Start
Dispensing
0–24V
Error Reset
0–24V Signal
Temperature OFF
0–10V Analog Signal
Temperature In
Analog Ground
0–10V Analog
Pin 6
Error
Reset
Pin 3
Voltage Initiate (Uset)
Pin 4
GND
Pin 12
Temp
OFF
Pin 1
Analog
Temp In
(0–10V)
Pin 2 & 10
Analog Gnd
GND
0/24V
GND
0/24V
0/24V
0/24V
GND
0/24V
0/24V

Nordson EFD PICO Touch Specifications

General

Brand	Nordson EFD
Model	PICO Touch
Category	Controller
Language	English