System Overview
2-2
Part 1618871−01
2020 Nordson Corporation
Console and System Hardware and Software
Main Controller Components
See Figure 2-2. A fully equipped main controller supporting 4−16 spray
guns contains the following hardware:
Touchscreen interface
Interlock switch and power switch
PLC
Relay board
Backplane and card cage with up to 8 spray gun cards (each
card controls 2 spray guns)
One 600 W and one 120 W 24 Vdc power supply
E-stop
Flow modules
Gateway
Auxiliary Controller Components
Auxiliary consoles do not include the touchscreen, PLC, interlock switch,
relay board, or E-stop.
Remote Controller
The touchscreen interface is available in a remote controller with mounting
hardware and with optional E-stop. An accessory pedestal is also available.
The remote controller houses the touchscreen interface, while all other
hardware stays in the main controller cabinet.
Up to three touch screen displays can be used per a main controller.
To Next Page
Loading...
