Troubleshooting
4-1
Part 1618871−01
2020 Nordson Corporation
Section 4
Troubleshooting
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
CAUTION: Do not turn off console power without first performing a program
shutdown. Doing so could corrupt the Engage program and operating
system on the program card.
The troubleshooting in this manual relates to LED and hardware checks for
the Engage controller. The Engage controller interface software offers
operation, alert, and alarm troubleshooting through the touch screen
interface.
NOTE: If the troubleshooting procedures in this section do not solve your
problem, contact the Nordson Industrial Coating Systems Customer Support
Center at (800) 433−9319 or your local Nordson representative.
To Next Page
Loading...
