Repair
5-1
Part 1618871−01
2020 Nordson Corporation
Section 5
Repair
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
CAUTION: Do not turn off console power without first performing a program
shutdown. Doing so could corrupt the Engage program and operating
system on the program card.
WARNING: Hazardous voltages exist within the Engage console. Unless
power must be on to test circuits, always shut off and lock out power before
opening the console to make repairs. All repairs should be made by a
qualified electrician. Failure to observe this warning could result in personal
injury or death.
WARNING: Whenever replacing a component that interfaces with the
exterior of the enclosures, such as an iFlow digital flow module, make sure
that the dust-tight integrity of the enclosures are intact by installing the
correct gaskets and seals. Failure to maintain the dust-tight integrity of the
enclosures could invalidate agency approvals and create a hazardous
condition.
To Next Page
Loading...
