Nordson Encore - Page 95

Nordson Corporation B Westlake, Ohio
DOC14049-02
EU DECLARATION of Conformity
Product: Encore Engage Powder Spray Systems
This Declaration is issued under the sole responsibility of the manufacture.
Models: Encore Main Controller with Display, Encore Main Controller with Remote Display, Encore Engage
Auxiliary Units
Description: This is an electrostatic, powder spray system, including Manual and Auto applicators, control
cables and associated controllers.
Applicable Directives:
2006/42/EC - Machinery Directive 2014/30/EU - EMC Directive 2014/34/EU - ATEX Directive
Standards Used for Compliance:
EN/ISO12100 (2010)
EN61000-6-3 (2007)
FM 7260 (2018)
EN50050-2 (2013)
EN61000-6-2 (2005)
EN55011 (2009)
EN50177 (2012)
Principles:
This product has been designed & manufactured according to the Directives & standards / norms described
above.
Type of Protection:
- Ambient Temperature: +15ºC to +40ºC
- Ex tb IIIB T60ºC / Ex II 2 D / 2mJ = (Encore XT and HD Manual Applicators)
- Ex tc IIIB T60ºC Dc / Ex II (2) 3 D = (Enhance Manual Interface Controller)
- Ex II (2) D = (Engage Controllers and Remote Display) – Located in Unclassified Location (Zone)
- Ex II 2 D / 2mJ = (Encore Auto Applicator)
Certificates:
- FM14ATEX0051X = Encore XT and HD Manual Applicators (Norwood, Mass. USA)
- FM18ATEX0058X = Encore Enhance Manual Interface (Norwood, Mass. USA)
- FM11ATEX0056X = Encore Automatic Applicator (Norwood, Mass. USA)
- FM19ATEX0005X = Encore Engage Controller (Norwood, Mass. USA)
ATEX Surveillance
- 1180 SGS Baseefa (Buxton, Derbyshire, UK)
___________________ Date: 24Sept19
Jeremy Krone
Supervisor Product Development Engineering
Industrial Coating Systems
Amherst, Ohio, USA
Nordson Authorized Representative in the EU
Contact: Operations Manager
Industrial Coating Systems
Nordson Deutschland GmbH
Heinrich-Hertz-StraBe 42-44
D-40699 Erkrath