Fulfill
Retrofit for Mesa Melters
12
Part 1121938_02
2013 Nordson Corporation
Description
The Mesa Fulfill Retrofit Kit converts a Mesa melter into an automatic fill
system that maintains adhesive in the melter, improving productivity and
reducing maintenance. The retrofit kit adds adhesive to the sealed tank,
reducing the possibility of char, contaminants, thermal shock and incorrect
adhesive temperatures that result in poor adhesive bonding.
The Fulfill system is shipped with the components illustrated in Figure 2.
2
3
1
6
7
5
4
8
Figure 2 Fulfill system components
1. Adhesive storage bin
2. Transfer hose
3. Suction lance
4. Control box and mounting bracket
with level sensor, filter-regulator w/
gauge, and solenoid
5. Hose clamp (2)
6. Air line (4m)
7. Wire tie (5)
8. Lid assy
Optional accessories available for the Fulfill Retrofit include:
a vibrator kit for the adhesive storage bin
a remote mount kit
a light tower kit for audio/visual fill/fault indication of the Fulfill processes.
Contact your Nordson representative for more information on these kits.
To Next Page
Loading...
Need help?
General
