Nortel 7400 - Contents

Contents 11
Multiservice Switch 7400 Hardware Installation, Maintenance, and Upgrade 6.1S2
Installing a 13-inch termination panel on a Multiservice Switch 7440
238
Installing a 19-inch rack-mounted termination panel 240
Installing a BITS wire 242
Installing a blank processor card 243
Installing a cabinet door alarm cable for a Multiservice Switch 245
Installing a cable management bracket on a Multiservice
Switch 7460 251
Installing a control processor 254
Installing a cooling unit into a Multiservice Switch 7440 256
Installing a cooling unit into a Multiservice Switch 7460 257
Installing a cooling unit into a Multiservice Switch 7480 260
Installing a CP Ethernet cable 262
Installing a desk-top mounted Multiservice Switch 7420 264
Installing a floor-mounted Multiservice Switch 7440 267
Installing a multiport aggregate device 268
Installing a Multiservice Switch 7420 into a rack or cabinet 272
Installing a Multiservice Switch 7420 into a seismic rack or
cabinet 275
Installing a Multiservice Switch 7440 into a rack or cabinet 279
Installing a Multiservice Switch 7460 shelf assembly 282
Installing a Multiservice Switch 7480 286
Installing a Multiservice Switch cabinet door 291
Installing a power supply filler in a Multiservice Switch 7460 292
Installing a power supply into a Multiservice Switch 7440 293
Installing a power supply in a Multiservice Switch 7460 296
Installing a power supply into a Multiservice Switch 7480 301
Installing a rack-mounted alarm panel / power and alarm panel 304
Installing a shelf interconnect cable 307
Installing a vertical-mount Multiservice Switch 7420 or Multiservice
Switch 7440 308
Installing ac power cables on a multiport aggregate device 310
Installing an ac power cable 311
Installing an alarm panel cable or cabinet door alarm cable 316
Installing an external alarm cable 317
Installing an FP 321