Nortel 7400 - Page 142

142 Chapter 23 FP cable upgrade
NN10600-175 6.1S2
Task flow navigation
The following references are listed alphabetically:
• “Clearing a switch request on a Multiservice Switch 7400.” See
NN10600-550 Nortel Networks Multiservice Switch 7400/15000/20000
Common Configuration Procedures.
• “Removing FP cables” (page 445)
• “Installing FP cables” (page 349)
• “Locking a function processor.” See NN10600-550 Nortel Networks
Multiservice Switch 7400/15000/20000 Common Configuration
Procedures.
• “Locking a port.” See NN10600-550 Nortel Networks Multiservice
Switch 7400/15000/20000 Common Configuration Procedures.
• “Switching between active and standby processor cards.” See
NN10600-550 Nortel Networks Multiservice Switch 7400/15000/20000
Common Configuration Procedures.
• “Unlocking a function processor.” See NN10600-550 Nortel Networks
Multiservice Switch 7400/15000/20000 Common Configuration
Procedures.
• “Unlocking a port.” See NN10600-550 Nortel Networks Multiservice
Switch 7400/15000/20000 Common Configuration Procedures.