Installation guidelines
3-21
User Guide Rel 1.0 Standard May 1999
Procedure 3-6
Mounting the cabinet on the pad
Use this procedure to install the AN2016 Cabinet on a concrete pad.
Requirements
You need the following tools and materials:
• hammer
• pinch bar, 30 in. (750 mm)
• tin snips
• socket wrench set
• screwdriver, 3/8 in. (11 mm)
• heavy duty straps, or ropes, as required
• extra-deep socket, 7/8 in., for standard anchoring
• spirit level, 24 in. (610 mm)
—continued—
Risk of cabinet tipping
Before opening the front or rear door, ensure that
the other door is locked. Open both doors at the
same time only when the cabinet is secure on the
pad.
CAUTION
Risk of doors misalignment
Use spacers to level the cabinet to prevent the doors
from becoming misaligned.
To Next Page
Loading...
