Nortel Modular ICS 4.0 - Deleting an Assigned Password; Programming a Telephone to Log Calls Automatically

112 / Tracking your incoming calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
4. Re-enter your password. The display reads
Password changed, which confirms that your password
has been changed.
Deleting an assigned password
ƒ•°fi
1. Press ƒ•°fi . The display reads
Old passwrd:.
2. Enter your old password. The display reads
New passwrd:.
3. Press ˙ or OK
. The display reads
No pswd assigned, which confirms that your password
has been deleted.
Programming a telephone to log calls automatically
Your installer or customer service representative can program
each telephone to automatically log calls coming in on a line.
Displays
The caller's name is unavailable.
The caller’s number is unavailable.
_ indicates a new item.
¯ indicates that the call was answered.
§ indicates a long distance call.
1:Unknown name
1:Unknown number
12:KATE SMITH
NEXT ERASE MORE
12¯KATE SMITH
NEXT ERASE MORE
12§KATE SMITH
NEXT ERASE MORE
p0881591.book Page 112 Wednesday, August 19, 1998 6:43 PM