Time savers for making calls / 69
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Using Saved Number Redial
ƒfl‡
You can save the number of the external call you are on
(provided you dialed the call) so that you can call it again later.
Each telephone can save one number at a time with Saved
Number Redial, not one number for each line.
Saving a number
Press
ƒfl‡
while you are on the call.
Saved Number Redial records a maximum of 24 digits.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number exactly as if you were
dialing it normally. When you are finished,
press
˙
.
If you want to program a line or line pool
selection for this speed dial number, select
the line or line pool. Otherwise, enter the
telephone number you want to program
exactly as if you were dialing it normally.
When you are finished, press OK
.
There is no line associated with the speed
dial number you are trying to use. Select a
free external line or line pool and enter the
speed dial feature code again.
The system cannot dial the number stored.
Reprogram the number.
For other displays, see “Common feature displays” on page 203.
Tip -
You can copy a number onto an autodial button
using Saved Number Redial.
Program and HOLD
Program and OK
QUIT OK
Select a line
Unknown number
p0881591.book Page 69 Wednesday, August 19, 1998 6:43 PM
To Next Page
Loading...
