Nortel Modular ICS 4.0 - Making Changes to Call Forward no Answer

Frequently used programming operations / 23
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Making changes to Call Forward No Answer
Begin the programming session
Change where a call goes when there is no answer
Use the dial pad and --> until you have the entire
name.
The name can be up to 7 characters long, including spaces.
Press ‘ to use the name you have entered.
Press ® to end your session.
You can press – once to continue programming this line, or press
– twice to return to the Lines heading.
Press ƒ .
Press ••¤flfl‹›› .
Press ¤‹fl›fl .
Press ≠ .
Enter the internal number (DN) of the telephone or
voice mail extension. In this example, it’s 225.
If the set has been given a name, it appears on the display.
Name:L___
<-- BKSP -->
Name:LOCAL
<-- BKSP -->
Name:LOCAL
CLR CHANGE
End of session
Jan 1 12:00pm
Feature:
Password:
RETRY
Terminals&Setsˆ
Show set:___
LIST
p0881591.book Page 23 Wednesday, August 19, 1998 6:43 PM