Normal Mode
50
UDACT Instruction Manual PN 50050:H 09/16/2002
Mode
Pressing the MODE key followed by a valid 4-digit numerical code and ENTER/STORE selects one of the
four modes of operation.
☛ To enter Normal Mode from any other mode press MODE, then 6676, then ENTER/STORE.
6676 spells NORM on a Touch-Tone® phone.
1st Event
This key along with the Up Arrow and Down Arrow keys, are used to display UDACT fault conditions.
Press the 1
ST EVENT key at any time to display the first event that occurred.
Down Arrow
Use the Down Arrow key to view other fault events (older) that have occurred and are active - not
cleared yet.
Up Arrow
Use the Up Arrow key to view other fault events (newer), that have occurred and are active - not cleared
yet.
Enter/Store
See individual mode descriptions in other sections for detailed descriptions of the ENTER/STORE key.
Technical Manuals Online! - http://www.tech-man.com