NTI ENVIROMUX E-2D User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
135
4. Locate the date/time battery in the ENVIROMUX (see images above).
5. Using a non-conductive
stick-like object (ex. a Q-tip with the cotton removed from one end), press the battery out of the
battery holder. Be careful not to let it fall onto the circuit board if you are doing this with power ON.
In E-16D – apply pressure to edge of
battery as shown, pressing the battery
against the spring…..
…..compress spring until
clip is cleared……
spring
…then tilt the battery up to
remove it.
In E-5D – apply pressure to edge of
battery as shown, …..
… pressing the battery out from under
the retaining clip.
retaining clip
E-16D Battery
R
emoval
E-5
D
Battery
R
emoval

NTI ENVIROMUX E-2D Specifications

General

Brand	NTI
Model	ENVIROMUX E-2D
Category	Measuring Instruments
Language	English