CNC Operation
en-938821/2 5 - 31
5
Exit from the procedure
Select the load mode (See 5.4.1).
Select "SELECT ACTIVE PROGRAM". ☞
#
3
The cursor moves to the following line:
3 SELECT ACTIVE PROGRAM
Press the "CYCLE" button on the machine panel.
The "INCYC" indicator is displayed in the status window (see 3.1.3) and the following message appears on the dialogue
line:
(%..) ❚
Enter "-PPR (or -PPL)". ☞
The "INCYC" indicator disappears and the information page is displayed.
The buffer area in the programme memory is cleared.
To Next Page
Loading...
