After plugging in the mouse the mouse cursor will appear on the screen.
User Login
Right click on screen and a pop-up login box will appear; Move cursor to the password input frame,
double-click left key of mouse to enter the input box, click relevant character to input the password, then
click ENTER or right click to reserve and exit.
Entry Menu
Method 1: Right click to enter the main menu after logining system.
Method 2: Move cursor to the bottom of screen, reveal the status bar automatically, and click icon
to enter the main menu.
Mouse Option
＊Modify Number Double-click mouse left key to input umber or use trolley of mouse to modify
number directly.
＊Modify Character Double-click mouse left key to input character.
＊Modify Option Choose option with trolley of mouse or in the option box after left click
＊Exit Menu Right click to exit menu step by step.
Adjusting the Monitor views
＊Image Switch On display, move mouse cursor to bottom, status bar will reveal automatically,
then click icon to switch image.
＊Full Screen Image On 4-screen, move mouse cursor to a channel, double-click mouse left key to
view Full screen, double-click again will back full screen to 4-screen.
Section 4 Input mode introduction
DVR support three input modes: number, capital and lowercase letter input. Press to get into input
interface on number input box or character edit box as shown in Fig. 9:
To Next Page
Loading...