Backup
Plug the USB storage device into the USB port marked . Press or on the front panel to enter
search interface.
In “searching box”, after moved cursor to a certain record section, use “left” or “right” button to choose the
section(“√” signal will show on select box right beside the record section )
If you select “Merge”, system will backup selected files to USB device as one file.
Backup device note:
1. Support Portable HDD storage and flash disk. Portable HDD storage or flash disk has to be formatted
as FAT32 format before backup.
2. A folder named “BACKUP” will be created in the external HDD, and the data will be put in the
“BACKUP” folder.
Note: 1.USB device and DVR may be damaged if USB device falls off during backup.
2. Do not connect more than 2 USB storage devices to one DVR.
Section 10 Network Setup
Enter “Main Menu－Advanced－Network”, as shown in Fig.26
To Next Page