Fig. 23
Move cursor with and on the front panel and select item with and .
Record Duration: Length of recording whenever alarm or motion detection is activated. Default length: 10
minutes.
Pre-record Time: Activate pre-record function including “OFF、5s、15s、25s、30s”. Default pre-record time:
OFF
External Alarm Input Setting
Enter “Alarm In” to set external alarm input
Alarm In： Select a alarm input port for setup
Alarm Out: Activate alarm out or not.
Relating：When external alarm activated, relevant channel can be selected to record if recording period has
been setup in “Schedule” menu.
Buzzer Time：Buzzer time length when alarm, motion detection, video lost or video shelter is activated.
Default length: 10 seconds.
Schedule: Enter “Schedule” interface to setup alarm period in which system will activate relevant disposal
mode such as buzzer alarm, alarm output, relevant channel recording if alarm has broken out. Alarm schedule
setting is the same as schedule recording setting, please refer Schedule Recording section.
Motion Detection/Video Lost/ Video Shelter Alarm Setting
Enter ‘Motion’ to set motion detection alarm
To Next Page
Loading...