File handling and administration 87
The scroll bar on the right allows you to scroll through the whole log file. The
log file shows the following information:
■ the job number
■ the file name
■ the date and time at which the scan was made
■ the size of the image file
■ the scan resolution
■ the scanned format
■ the number of prints made
■ the Hollerith data.
For every job, the following additional information is displayed:
■ the directory in which the files are stored
■ the total file size
■ the total number of files and prints made
■ the time needed for the job.
The REJECT FILE display contains the same information, but for rejected scans
only.
Print Clicking this button prints the LOG FILE or the REJECT FILE currently
specified. In order to print the contents of the *.
LOG file or *.REJ file, the files
may not be larger than 64 kB.
You can print your LOG FILE or REJECT FILE on any Windows printer to be
selected via printers in the control panel group within the program manager of
Windows.
Additional functions
You can select one of the following additional functions:
Increment File on Reject If you select this option and you have specified a
predefined file name with a numeric count, the number will be incremented if
a card is rejected. If you have selected ‘Make .HOL file’, the Hollerith
information of the rejected card will be saved in a separate file.
To Next Page
Loading...
