96 Océ 3050 User Manual
Error messages
The following table provides an alphabetic list of error messages.
Error code Error message
BTN_RUNFRAME Frame
IDS_MSG10 Failed to start the low level machine driver program.
IDS_MSG11 Maximum image line length of 32000 has been ex-
ceeded.
IDS_MSG12 Maximum pixel line length of 15200 has been exceed-
ed.
IDS_MSG13 Scanner failed to initialise. Please ensure the scanner is
switched on and in working order. Press OK to return
to Windows.
IDS_MSG14 No write privilege for this directory. Press OK to con-
tinue with this directory or Cancel to return to the
Printer Connect dialogue box.
IDS_MSG15 The specified directory does not exist. Press OK to
continue with this directory or Cancel to return to the
Printer Connect dialogue box.
IDS_MSG16 Printer Setup cannot be changed during scanning.
IDS_MSG17 File Handling parameters cannot be changed during
scanning.
IDS_MSG18 Specified scan file directory does not exist. Please try
a new directory.
IDS_MSG19 Anamorphic zoom range is 5% to 2000%. Please enter
a value in range.
IDS_MSG20 Network printer spool directory does not exist. Please
enter a valid drive and path.
IDS_MSG21 Printer Queue directory is invalid. Please enter a valid
drive and path.
IDS_MSG22 SCSI address must be in the range 0 to 7. Please enter
the required address.
IDS_MSG23 No macro responses found. The ‘OCE.INI’ either does
not exist or has been corrupted.
IDS_MSG24 No macro commands found. The ‘OCE.INI’ is either
missing or corrupt.
IDS_MSG25 New file name already exists. Please try again.
IDS_MSG26 Scan resolution is from 100 - 400 dpi. Please enter a
value in this range.
[62] Error messages
To Next Page
Loading...
