Technical specifications 97
IDS_MSG27 This combination of width, reduction ratio and Y off-
set is outside the operating region of the scanner.
IDS_MSG28 This combination of length, reduction ratio and X off-
set is outside the operating region of the scanner.
IDS_MSG29 Image width * resolution is outside the range 600 to
16000 pixels. Pleas modify either the width or resolu
-
tion values.
IDS_MSG30 Key name must equal the number of Hollerith ele-
ments from which it is read. Please enter a matching
name.
IDS_MSG31 Cannot have a file name greater than 8 or less than 1
character. Please modify the number of checked Hol
-
lerith File name elements to between 1 and 8.
IDS_MSG32 Format code must match the number of Hollerith ele-
ments from which it is read. Please enter a matching
code.
IDS_MSG1101 Input hopper empty. Please fill the Input Hopper and
press Retry to continue. Cancel returns to the Control
screen.
IDS_MSG1102 Card misfeed. Please fan the cards in the Input Hopper
and press Retry to continue. cancel returns to the Con
-
trol screen.
IDS_MSG1103 Card edge detection failure.
IDS_MSG1104 Card failed to feed out of the machine.
IDS_MSG1106 Card failed to scan.
IDS_MSG1107 Unable to find a valid Hollerith format code. Image re-
jected, no data written to disk.
IDS_MSG1108 Maximum file length cannot exceed 8 characters.
Please modify the filename or the initial count.
IDS_MSG1109 Unable to identify a valid image size. Image rejected,
no data written to disk.
IDS_MSG1110 No templates left to delete. Press OK to continue.
IDS_MSG1111 The current template has been selected for deletion.
Press YES to delete the template.
IDS_MSG1112 Image data buffer overflow. Insufficient memory is
available to buffer this image. Please change the imag
-
ing parameters or increase the amount of PC memory.
IDS_MSG1113 Image data transfer to PC has stopped. Check the PC
to Scanner cable connection.
IDS_MSG1114 Compressed image data buffer overflow. Try closing
other applications, adjusting the imaging threshold pa
-
rameters or fitting more memory.
Error code Error message
[62] Error messages
To Next Page
Loading...
