Oce VarioPrint 2090 - Adding Staples

118 Océ VarioPrint 2090 Configuration and maintenance manual
How to load the paper in the paper tray
1
Press the button on the front side of the paper tray to open the paper tray.
[62] Open the paper tray
[62] Open the paper tray
The LED of the paper tray blinks rapidly while the tray inside moves down.
2 Wait for the paper tray to unlock and open.
3 Take the paper from the pack.
4 Hold each pack of paper at the two short sides.
5 Bend the pack.
6 Put the paper into the paper tray.
Oriented paper (company paper for example) is always loaded face down.
7 Adjust the paper guides.
Based on the position of the paper guides the Océ VarioPrint 2090 can identify
the paper size.
Note: The paper type cannot be set on the Océ VarioPrint 2090. The paper
types are defined in Intralogic, the printer driver or another tool.
8 Close the paper tray.
The tray inside moves up again and the LED on the paper tray is off.