Oce VarioPrint 2090 - Upgrade the Controller Software

88 Océ VarioPrint 2090 Configuration and maintenance manual
Upgrade the controller software
Introduction
Task for: system administrator
The system administrator takes care of the upgrade of the controller software.
You will receive a new software CD-ROM from your Océ representative. The
CD-ROM will go through the upgrade process automatically.
When to do
To install new releases or updates of the controller software, use the procedure
below.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the
system administrator mode (see ‘Access the Océ VarioPrint 2090 Settings
Editor in system administrator mode’ on page 12).