Oce VarioPrint 2090 - Key Operator Telephone Number

System configuration 31
Set the date and time
Introduction
Task for: key operator
The Océ VarioPrint 2090 Settings Editor allows you to change the date and
time on the copier/printer. The status report function and the log function use
this information in the report that you print or upload. This procedure shows
you how to use a remote workstation to change the date and time of the
copier/printer.
When to do
The copier/printer date or time is not your current local date and time.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see ‘Access the Océ VarioPrint 2090 Settings Editor in key
operator mode’ on page 9).