Oce VarioPrint 2090 - Test the Network Connection

Printer configuration 83
Test the network connection
Introduction
Task for: system administrator
There are 2 methods to test the connection of the Océ VarioPrint 2090 to the
network.
■ Method: PING (Packet INternet Groper) An Internet utility to detect if the
physical IP address is reachable. PING tests a network connection (PING
sends a packet and waits for a response) and detects errors.
■ Method: LPR (LPR - Line Printer Remote) LPR refers to the process that
sends the jobs to the printer or print queue. The LPR software enables you
to send the print jobs to the LPD printer.
The system administrator can perform these tests to check the network
connection.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the
system administrator mode (see ‘Access the Océ VarioPrint 2090 Settings
Editor in system administrator mode’ on page 12).