Oce VarioPrint 2090 - Default Scan Mode (1 or 2-Sided)

System configuration 43
Set the operator language
Introduction
Task for: key operator
You can select the language of the Settings Editor and the text on the operator
panel of the Océ VarioPrint 2090. The default language is UK-English.
Use the Océ Settings Editor to select a language. You can select one of the 14
available languages.
Note: There is no language setting available on the screen of the operator
panel. You can only change the language through the Océ Settings Editor.
When to do
■ If the language on the screen is not the preferred language in your company,
you change this language.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see ‘Access the Océ VarioPrint 2090 Settings Editor in key
operator mode’ on page 9).