Oce VarioPrint 2090 - Enable;Disable FTP

Printer configuration 81
Enable/disable FTP
Introduction
Task for: system administrator
FTP (File Transfer Protocol) is a platform independent data transfer protocol.
The FTP protocol enables the transfer of files through the network between the
Océ Smart Imager and the service laptop of the Océ service technician.
You can define to use the FTP protocol or not (enable,disable). FTP is by
default enabled.
Note: If the network security policy of your company does not allow FTP, you
can disable the FTP setting in the Océ Settings Editor.
When to do
When a service technician performs maintenance, the service technician must
be able to retrieve information from the Océ Smart Imager through FTP.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the
system administrator mode (see ‘Access the Océ VarioPrint 2090 Settings
Editor in system administrator mode’ on page 12).