Oce VarioPrint 2090 - Page 84

80 Océ VarioPrint 2090 Configuration and maintenance manual
Illustration
[38] Enable t he LPD network printing
[38] Enable the LPD network printing
How to enable the LPD protocol
1
Select 'Print option' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Click 'LPD network printing'.
3 Select the radio button 'Enable' or 'Disable' to make printing from the network
possible or not.
4 Click the 'OK' button to apply the changes.
Note: If you select Disable, the Océ VarioPrint 2090 cannot receive print jobs
from the network.