58 Océ VarioPrint 2090 Configuration and maintenance manual
Remove all print jobs from the mailbox
Introduction
Task for: key operator
To restart the system with an empty mailbox, you can remove all current jobs.
Do this for example if the system crashes because of a damaged job that you
sent to the mailbox.
Use the Océ VarioPrint 2090 Settings Editor to remove all print jobs from the
mailbox.
Note: The system clears the mailbox, which indicates that the print jobs are
removed, whether they are printed or not.
When to do
A service technician can ask you to clear the mailbox for example to delete a
damaged print job.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see ‘Access the Océ VarioPrint 2090 Settings Editor in key
operator mode’ on page 9).
To Next Page
Loading...
