Oce VarioPrint 2090 - Page 34

30 Océ VarioPrint 2090 Configuration and maintenance manual
Illustration
[11] Activate a nd change the wake-up PIN cod e
[11] Activate and change the wake-up PIN code
How to activate and change the wake-up PIN code
1
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Select 'Wake-up PIN code'.
3 Check the 'Enable' box to activate the wake-up PIN code.
4 Enter the PIN code you prefer.
5 Click the 'OK' button to apply the changes.
How to wake-up the Océ VarioPrint 2090 from sleep mode with PIN code
1
Press the On/Off button .
2 Enter the wake-up PIN code.
3 The LED in the On/Off button changes from amber to green.