Oce VarioPrint 2090 - Page 80

76 Océ VarioPrint 2090 Configuration and maintenance manual
Illustration
[35] Enable SNMP pr otocol
[35] Enable SNMP protocol
How to enable/disable the SNMP protocol
1
Select 'System' in the title bar of the Océ VarioPrint 2090 Settings Editor.
2 Click 'Network protocols'.
3 Click 'SNMP protocol'.
4 Select 'SNMP'.
5 Select 'Enable' or 'Disable'.
6 Click the 'OK' button to apply the changes.