To Next Page
H
Heather WeaverAug 15, 2025
What to do if ODB LCT6000 Blower boom will not go down?
- TTony McconnellAug 15, 2025
To troubleshoot why the ODB Blower boom won't go down: * First, use a test light to make sure there is current at the outside solenoid post (item#2), which has a 4 gauge Red battery cable attached. If no current is found, check the battery condition and battery connections. * Then, press and hold the 'down' button (item# 4), take a test light and probe through the insulation and test for current on the red wire at the valve (item #5). * If there is current, the valve is bad and needs to be replaced (Valve part number is MP-19283.D). If there is NO current, check the wiring between the switch and valve, especially any connections. If the wiring checks out okay, the switch is bad and needs to be replaced.
General