43
ODB COMPANY
800-446-9823 LCT6000
Operating Section
3.7 Engaging the PTO, continued;
5. MPORTANT: If the unit experiences any heavy vi-
brations or makes any unusual noises, shut the en-
gine down and after following the necessary safety
guidelines, have a qualied technician investigage
the cause. DO NOT operate a unit that is in a state of
disrepair.
6. If the unit is running smoothly and does not dispaly any
excessive vibration, the unit is ready to vacuum leaves.
NOTE: Please see the next section before vacuuimg
leaves.
Disengaging the PTO (refer to gures 3b and 3d):
1. Decrease the rpm to 1000 rpm.
2. Grasp the PTO handle and slowly disengage the PTO.
3. When the PTO is fully disengaged, the engine can be shut
down.
gure 3d
PTO shown fully engaged
PTO shown disengaged
gure 3b
To Next Page
Loading...
