ODB LCT6000 - Page 57

57
ODB COMPANY
800-446-9823 LCT6000
Maintenance Section
4.6 QUICK REFERENCE MAINTENANCE CHART
Only properly trained personnel should perform maintenance or
repair on this equipment. Consult ODB before performing any
maintenance procedures that is not specicially covered in this
manual. Improper maintenance or repair may void any and all warranties
on this equipment.
NOTE: THIS CHART IS FOR REFERENCE ONLY, CONSULT THE ENGINE’S OWNERS
MANUAL FOR SPECIFIC DETAILS. FOR JOHN DEERE 4045T ENGINES ONLY.
ITEM
Fuel Requirement
Fuel Capacity
Low / High Idle Speed
Engine Oil:
Grade
Viscosity
Capacity
Coolant:
Type
Mixture
Freezing Point
Amount
Hydraulic Tank
Type
Amount
Diesel fuel specied to EN 590 or ASTM D975
900 rpm / 2,600 rpm
API service classiccation; CG-4, CF-4
SAE15W-40 / SAE10W-40, or SAE 5W-30
(see EOM manual for details)
9 US qt
Permanent type of antifreeze; green in color
(see EOM manual)
Water 50%; Antifreeze 50%; (1:1)
-35 degrees C (-31 degrees F)
2.5 US gallons
High Viscocity, Premium Hydraulic Fluid; Shell Tellus #68
recommended. (ISO 68 viscosity grade)
8 US gallons
Improper maintenance or repair CAN result in equipment damage
and/or personal injuries.
BEFORE CONTINUING, please read and understand the Safety, Preoperating
and Operating sections of this manual before doing any prodcedures in this
section.
DISCRIPTION