42641101TH Rev.1 109 /
Oki Data CONFIDENTIAL
10) Interface Parameter Setting
* PSE means POSTSCRIPT3 EMULATION.
Press the ITEM + key.
Press the ITEM + key.
Ready USB
MENU
Ready ON-LINE
XXX
Press MENU key several times.
Press ITEM key to display the item on the LCD to set up.
Press VALUE key to display the value on the LCD to set up.
Press SELECT key, and display "*" mark on the right side of the value:
By pressing the ON LINE key, menu setting mode is completed and the printer returns to on-
line state.
Press the MENU key 9 times.
(If RS232C is installed, press the MENU key 10 times.)
Ready
XXX : PCL, AUTO, PSE*, HEX DUMP, PRR or FX
USB
Item USB I/F
Contents of Display Function
ENABLE
DISABLE
ENABLE
DISABLE
Factory Setting: ENABLE
To Next Page
Loading...
