42641101TH Rev.1 93 /
Oki Data CONFIDENTIAL
"RS232C MENU" is displayed on the LCD.
Press the SELECT key.
Ready
Ready RS232C
MENU
FLOW CTL
Ready ON-LINE
XXX
Item Flow CTL
Contents of Display Function
DTR HI
DTR LO
XONXOFF
RbstXON
SPACE-READY
MARK-READY
Sending at intervals of 1 sec.
Factory Setting: DTR HI
Press MENU key several times.
Press ITEM key to display the item on the LCD to set up.
Press VALUE key to display the value on the LCD to set up.
Press SELECT key, and display "*" mark on the right side of the value:
By pressing the ON LINE key, menu setting mode is completed and the printer returns to on-
line state.
Press the MENU key 9 times.
XXX : PCL, AUTO, PSE*, HEX DUMP, PRR or FX
* PSE means POSTSCRIPT 3 EMULATION.
Press the ITEM + key.
Ready
RS232C
Item RS232C I/F
Contents of Display Function
ENABLE
DISABLE
ENABLE
DISABLE
Factory Setting: ENABLE
Press the ITEM + key.
8) Interface Parameter Setting