8
8-1 How Fiery E-mail Service works
The Fiery E-mail Service allows you to remotely print to and control the Fiery
using your current e-mail infrastructure. It allows you to print to remote locations
and bypass firewalls. With E-mail Service, you can submit jobs to the Fiery as
e-mail attachments.
You can use E-mail Service in the following ways:
• Print using an E-mail Client
• Print using the Fiery E-Mail Port Monitor
How Fiery E-mail Service works
In order to use the e-mail services, you must set up E-mail Service as described in
Chapter 4 of the Configuration Guide.
To print with an E-mail Client, you send a file as an e-mail attachment, and E-mail
Service extracts the file and sends it to the Fiery. The attachment can be in any format
the Fiery recognizes (PS, EPS, PDF, and TIFF).
To print using the Fiery E-mail Port Monitor, you must print to a printer connected to
the Fiery E-mail Port Monitor. If you have the E-mail Port Monitor set up, your print
job is e-mailed to the Fiery when you choose Print from an application. For more
information about setting up the E-mail Port Monitor, see Chapter 1 of the
User Software Installation Guide.
The Fiery also supports internal address books. Administrators can retrieve, add,
delete, and clear addresses from the address books by sending requests via e-mail.
For more information about address books, see the Configuration Guide.
NOTE: Fiery E-Mail Service will not process .vbs, .exe, or .bat extensions.
Chapter 8:Using
Fiery E-mail
Service
To Next Page
Loading...
Need help?
General
