xi About this manual
The Fiery Network Controller for C9800 is used to print final documents or proof
jobs that will be printed later on an offset press. You can send a print job to the Fiery
as you would to any other printer—select it in the Print dialog box and then print from
any application on your computer.
NOTE: The term “Fiery” is used in this manual to refer to the Fiery Network
Controller for C9800. The name “Aero” is used in illustrations to represent the Fiery.
The term “Windows” is used to refer to Windows 98, Windows Me, Windows NT 4.0,
Windows 2000, Windows XP, and Windows Server 2003, wherever appropriate. The
term “Setup” is used to refer to configuring the Fiery for proper performance in your
network environment, including settings that affect all jobs. The term “job
management tools” is used to refer to Command WorkStation, Command
WorkStation LE, and Fiery Spooler
™
.
Although it may not be the case at all sites, it is assumed that an operator controls and
manages jobs sent by users from remote workstations. For information on the features
of the job management tools, see the Job Management Guide.
About this manual
This manual is intended for remote users who send jobs via the network to the Fiery.
It covers the following topics:
• Printing from a Windows computer
• Printing from a Mac OS computer
• Printing from a UNIX workstation
• Downloading files and fonts using Fiery Downloader
™
and
Fiery WebDownloader
™
• Printing variable data documents
• Using the EFI Converter
• Using Hot Folders (C9800 GA only)
Introduction
To Next Page
Loading...
Need help?
General
